Alecto DBX-99 User Manual Download Page 21

20

21

4.3 RANGE:

This baby intercom has a range of 300 meters in an open field and 

up to 50 meters indoors; this range depends on local conditions 

(concrete walls, other baby intercoms, wireless phones, etc.).

4.4 BATTERY USAGE:

With fully charged NiMH batteries with a capacity of 400mAh, you 

can use the parent unit more than 12 hours without the power adap

-

tor. This time depends on the use (the setting of the volume level, 

the condition of the rechargeable batteries, etc.).

You can check the battery status on the display of the parent unit.

Connect the power adaptor as soon as the battery symbol indicates 

that the batteries are (almost) empty.

The charging time of empty batteries is approximately 12 to 

24 hours.

The display of the parent unit indicates the status of 

the battery: 

The battery is full.

The battery is still full for 2/3.

The battery is full for 1/3, charging is advised.

The battery is low; the parent unit will switch of soon; connect 

the adapter immediately to charge the batteries.

As soon as the battery low indicator illuminates, also a alert beep 

sounds every 30 seconds, and [ LOW BATT ] will flash on the dis

-

play.

4.5 POWER SUPPLY:

Adaptors:

When using adaptors, only use the supplied adaptors. Connecting 

power adaptors other than the supplied adaptors can cause damage 

to the electronics of the baby intercom. 

Batteries:

In the parent-unit, you may only install a OPLAADBARE battery pack 

of the type Nikkel Metaal Hydride, size AAA, voltage 1.2V, power 

400mAh or more.

4.6 MAINTENANCE:

Only clean the baby monitor with a moist cloth; never use chemical 

cleaners. Before any cleaning, you must disconnect the adapters.

Before cleaning, any connected power adaptors must be discon

-

nected.

4.7 ENVIRONMENT:

The packaging of this baby video monitor can be discarded as 

waste paper. At the end of the product’s life span, it must not 

be disposed of as normal domestic waste. You must bring it 

to a collection point for the recycling of electric and electronic equip

-

ment.

You must bring exhausted or defective batteries to your local depot 

for small chemical waste or to dedicated battery collection points. 

Never discard batteries as normal domestic waste.

5 DECLARATION OF CONFORMITY

The Alecto DBX-99 meets all essential requirements and provisions 

as described in the European Directive 1999/5/EC. The declaration 

of conformity is available on the website WWW.ALECTO.NL

6 TECHNICAL SPECIFICATIONS

No. of channels: 

120 (set automatically)

Frequency: 

1881.792 - 1897.344 MHz

Baby unit power: 

power adapter: 6VDC 450mA/

 (incl.) 

Ten Pao - S004LV0600045

Parent unit power: 

power adapter: 6VDC 450mA/

 (incl.) 

battery pack: NiMH, 2 x 1.2V 400mAh 

 

Size AAA or HR03 rechargeable (incl)

Transmission power:  250 mW max.

Recommended ambient temperature: 0°C to 39°C

Storage temperature:  0°C to 60°C

Sensors: 

DECT ULE

DBX99-manual-GB-v1.0.indd   21

31-3-2016   10:11:35

Summary of Contents for DBX-99

























Reviews: