23
7 MULFUNCTION TABLE
If the tips outlined above do not resolved the problem, try to correct
the malfunction as follows:
1.
Remove the batteries from the parent unit and where applicable,
also from the baby unit.
2.
Take the power adapter out of the electrical wall outlet.
3.
Wait a few minutes.
4.
Replace the batteries back and re-connect the power adapter
again.
If the malfunction occurs again, please contact your dealer.
MALFUNCTION:
LINK light fla
-
shes
+
Alert beep
tones coming
from the parent
unit.
No sound co-
ming from the
parent unit.
Beep tones co-
ming from the
parent unit.
POSSIBLE CAUSE AND REMEDY:
The connection link between the parent unit and
baby unit has been dropped.
- Check whether the parent unit and the baby unit
are both turned on.
- Check the power supply (AC adapter or batteries).
- Check the distance between the parent unit and
baby unit, change if necessary.
- The volume is off, turn it on.
- The sensitivity level is set too low, increase it.
The volume is too loud and is giving a ringing tone
‘feedback’
- Turn down the volume on the parent unit.
- Increase the distance between the parent unit and
the baby unit.
Summary of Contents for DBX-76
Page 1: ...DBX 76 USER MANUAL...
