17
5.2.2 ECO MODE on:
If you have enabled the ECO MODE on the baby unit, as long as the
baby is asleep and completely at rest; there will be no automatic con-
nection control. The connection indicator will flash 1x every 5 seconds
in order to show that the ECO MODE is switch on and you do not
have an active continuous connection.
When the baby cries, the baby unit will re-establish an active connec-
tion with the parent unit and the link indicator will light up continuously.
Once the baby is quiet, the ECO MODE will be turned back on and the
light will blink again every 5 seconds.
When the ECO MODE has been switched on the baby unit it will be in
complete rest. Nevertheless you can check if you are in range of the
baby unit:
1.
Press once quickly on the key on the parent unit, the parent
unit will send a signal to the baby unit and if you are in range of
the baby unit a signal will be send back as a confirmation.
2.
If the parent unit receives the signal back, then you are in range
of the baby unit; you will hear a beep tone and the connection
indicator
will continue to flash every 5 seconds.
3.
If the parent unit does not receive a signal back then you are
out of range of the baby unit, or it is switched off; you will hear 3
short beep tones and the connection indicator flashes 1x per se
-
cond, you will hear 2 short beep tones and the display will show
[no connection]. Reduce the distance between you and the baby
unit (press regularly on the // key to check the connection).
5.3 BATTERY INDICATOR PARENT UNIT:
The parent unit is equipped with a battery indicator located on the
display:
battery full
battery 2/3 full
battery 1/3 full
battery empty
Summary of Contents for DBX-76
Page 1: ...DBX 76 USER MANUAL...
