Operation and functioning
AFTER SALES SUPPORT
23
GB IRE
3.6 V Li-Ion Screwdriver
GB
IRE
00800 34 99 67 53
once the rechargeable battery is fully charged.
During the charge process, the mains plug, charger
and rechargeable battery will warm up. This is due to
operational reasons and is not a defect.
4. Disconnect the charger from the mains after 3 hours.
5. Pull the charger’s mains plug.
6. Let the screwdriver cool down to room temperature if
was heating up during the charging process.
The screwdriver is now operational.
Operation and functioning
Inserting tools
Bits
11
with a length of 50 mm or more can be inserted
directly in the bit receptacle
7
. Proceed as follows to
properly fit all other bits:
1. Insert the magnetic bit holder
12
up to the stop
point in the bit receptacle.
2. Select a bit that corresponds to the screw.
3. Insert the selected bit up to the stop point in the
magnetic bit holder.
