AFTER SALES SUPPORT
USA
1 855 754 8297
19
Preparing the radio sensor for use
USA
the after sales support. The contact details are on the
warranty card.
The radio sensors can be located in different rooms or
outdoors. Each sensor must have its own radio sensor
number (1-3) allocated to it.
To use additional radio sensors:
1. Remove the battery compartment door
21
on the
back of the radio sensors.
2. Set a dedicated radio sensor number (1-3) for each
radio sensor using the channel switch
20
.
The selected radio sensor number (e.g. = radio
sensor number 1) will show on the display
18
.
3. Close the battery compartment door.
The base unit will receive the weather data from all
available radio sensors (see chapter “Preparing the
base unit for use”).
In the event of interference from nearby equipment
transmitting radio signals, you may change the radio
sensor number to avoid the interference.
Installing the radio sensor
Notes on installation
Take note of the tips below to ensure the
best possible signal receptions.
− Only install the radio sensor outdoors in a dry,
shaded area (e.g. under a roof).
