AFTER SALES SUPPORT
USA
1 855 754 8297
43
Troubleshooting
USA
Some problems may be caused by minor faults that you
can fix yourself. To do so, follow the instructions in the
following table. If it is still not possible to resolve the
problem, contact after sales support. Do not repair the
weather station yourself.
Problem
Possible cause & solution
Time signals
cannot be
received.
− Check if the installation location
is suitable for signal reception.
− Start the signal reception
manually by pressing the RCC
button on the base unit.
− Set the time manually.
The base
unit does not
receive any
signals from the
radio sensor.
− Make sure no electrical
appliances are near the radio
sensor or base unit.
− Check if the batteries in the radio
sensor are dead.
− Start the signal reception ma-
nually. To do so, press and hold
the CH button on the base unit.
− Move the base unit closer to the
radio sensor or vice versa.
Incorrect values
are being
displayed.
− Reset the weather station (see
chapter “Resetting the weather
station”).
