ALDI GPMXSZ461 User Manual Download Page 10

Page: 10 / 18

AFTER SALES SUPPORT

+44 (0)1904 727501

+353 (0)1 902 2605

www.coreservice.co.uk

46CM Petrol Lawnmower

IRE

Operation

Pull cord handle

With right hand, slowly but firmly pull the starter handle (Fig 11b)

and rope from the pull cord guide until you feel resistance, then

pull briskly. When the engine starts, return the starter rope to its

rest position gently.

Note! Clearing a flooded engine:

If the engine won’t start after you have trying to start several

times, the engine may be flooded with excess fuel.
Use the following procedure to clear and start a flooded engine:
A. Release the stop/start bar.
B. Remove the spark plug, dry it, and then reinstall it.

Note!

Install the spark plug carefully by hand, to avoid cross

threading.
After the plug is seated, tighten 1/8 to 1/4 turn with the spark

plug socket spanner to compress the washer.
C. Pull the stop/start bar toward the upper handle.
D. Operate the starter as described above.

3. Mowing
Note!

Always observe the strictest safety procedures when

using the lawnmower.
Carefully read the safety instructions of this manual before

using the lawnmower.
Start the engine and allow it to run. See ”Step-2 Starting the

engine”. To stop the engine, release the stop / start bar.
Keep a firm grip on the upper handle with the stop/start

bar and propulsion lever closed and walk along with it self-

propelling, never run with the mower, be very careful when

mowing uneven or rough ground. Mow across slopes, never

up and down. Be careful when changing the direction of the

mower on a slope. Do not use the mower on a steep slope of

more than 15°.
The best result will be achieved if the grass is dry. Wet grass will

tend to clog the blade and the grass collection system. Grass

grows at different rates at different times of the year.
Never use the lowest cutting height for the first cut of the

season or in drought conditions. Only about one third of the

grass height should be cut.
If the lawnmower will not collect the cuttings efficiently, the

grass discharge chute may be blocked. The hybrid collection

box may be full, or the underside of the mower deck may be

clogged.

Emptying the hybrid collection box
Note!

Before you remove the hybrid collection box, stop the

engine and wait until the blade stops completely.

Summary of Contents for GPMXSZ461



















Search results

Summary of Contents for GPMXSZ461

Reviews:

Related manuals for GPMXSZ461

Brands by name

Popular brands

ALDI GPMXSZ461, User Manual

Search results

Summary of Contents for GPMXSZ461

Reviews:

Related manuals for GPMXSZ461

Brands by name

Popular brands