HTW250/240P
Introduction
AFTER SALES SUPPORT
9
00800 4003 4003
MODEL: HTW250/240P PRODUCT CODE: 64055 xx/2017
XIII. TROUBLESHOOTING
The table below contains a list of fault symptoms and explains what you can do to
remedy the problem if your equipment fails to work properly. If the problem still
persists after working through the list, please contact your nearest service
workshop.
m
IMPORTANT!
Hint in case of sending the equipment to a service centre:
Due to safety reasons please see to it that the equipment is sent back free of oil and
petrol!
Fault
Possible cause
Remedy
Machine does not
work.
•
No fuel supply.
• Fault in the fuel line.
• Spark plug defective.
• Carburettor defective.
• Internal fault.
• Check the fuel quantity.
• Check the fuel line for kinks or
damages.
• Replace the spark plug.
• Manufacturer or responsible cus-
tomer service must be called.
• Manufacturer or responsible cus-
tomer service must be called.
Machine work
with interruptions.
• Internal fault.
•
ON/OFF switch defec
-
tive.
• Manufacturer or responsible cus-
tomer service must be called.
• Manufacturer or responsible cus-
tomer service must be called.
Engine is running,
cutting blade
does not move.
• Cutting blade blocked.
• Internal fault.
• Clutch defective.
• Remove object.
• Manufacturer or responsible cus-
tomer service must be called.
• Manufacturer or responsible cus-
tomer service must be called.
AUS
LE2500P
Troubleshooting
AFTER SALES SUPPORT
25
1300 855 831
MODEL: LE2500P PRODUCT CODE: 61758 09/2018
