Layout/Scope of delivery
HTW250/240P
10
AFTER SALES SUPPORT
00800 4003 4003
MODEL: HTW250/240P PRODUCT CODE: 64055 xx/2017
from flammable liquids.
• Keep your distance. The machine emits exhaust fumes. Ensure bystanders keep a
safe distance.
•
Never fill fuel tank indoors. Never fill fuel tank when engine is running or hot. Do
not smoke when filling fuel tank.
• When making any adjustments to the machine always wait for the blade to come
to a complete stop and turn off the machine.
•
Never attempt to unclog the blade chamber by tapping the machine on the ground,
this can damage the unit.
• Keep hands clear of edge guide and blade when cleaning as these wear to a very
sharp point during edging.
• Before landscaping or trenching, inspect and ensure there are no exposed or
buried cables or pipes or other objects that may create a hazard or interfere with
operating the machine.
• Set depth to only that required for the job, do not overload. If tool slows, pull back
slightly and wait until blade returns to normal speed.
• Check damaged parts before further use of the machine, a guard or other part that
is damaged should be carefully checked to determine that it will operate properly
and perform it’s intended function. Check for alignment of moving parts, binding of
moving parts, mounting, and any other conditions that may affect it’s operation.
• Ensure guards are kept in place.
•
Always keep blade area clean.
• When using the machine, stones, pieces of metal and other objects can be thrown
out at high speed by the blade. The tool and guard are designed to reduce the
danger. However, the following special precautions should be taken:
- Make sure that other people and pets are at least 5 metres away.
- Always stand to left side of main handle.
- Before landscaping or trenching, check for buried electrical cables.
- To reduce the risk of injury, work going away from nearby solid objects such as
walls, steps, stones, trees etc. Use great care when working close to solid objects,
and where necessary, do edging or trimming by hand.
• Use only blades as recommended.
•
Do not attempt to free a jammed blade before first switching off the machine.
• Let the blade come to rest naturally.
•
Periodically check that all fixings are properly tightened.
In addition, in spite of all the precautionary measures taken, non-obvious
residual risks can still exist.
Store all safety notices and instructions for the future.
AUS
Safety information
LE2500P
16
AFTER SALES SUPPORT
1300 855 831
MODEL: LE2500P PRODUCT CODE: 61758 09/2018
