HTW250/240P
Introduction
AFTER SALES SUPPORT
9
00800 4003 4003
MODEL: HTW250/240P PRODUCT CODE: 64055 xx/2017
Edging (Fig. 1)
m
WARNING!
Before edging, check that the area is clear of any obstacles and
objects that could be thrown.
NOTE:
If the cutting depth needs adjusting, this should be done progressively until
the desired depth is reached. Do not overload, keep initial cutting depth at minimum.
If the edger slows, pull back slightly and wait until the cutting blade (8) returns to
normal speed.
1. While the engine is idling, line up the lawn edger cutting blade (8) with the edge to
be cut. Use the arrow label on the blade guard (9) to assist in guiding you where
the cutting blade will cut.
2. Before beginning to edge, tilt the upper handle (3) down so the cutting blade (8) is
above ground level. This assists in the prevention of kickback.
3. When starting to edge, pull the throttle lever (2). Run the engine at full throttle and
lower the cutting blade (8) gently into the ground. Be careful not to hit concrete
with the blade.
4. Walk forward slowly, keeping the cutting blade (8) aligned with the edge to be cut.
If the lawn edger begins to slow down due to a build up of grass in the blade guard
(9), walk back slightly to allow the grass to fall out. Let the cutting blade (8) return
to normal speed before continuing forward.
NOTE:
Some sparks may be generated from the cutting blade (8) while pressed
against a solid edge (eg; concrete) to be cut, simply align the cutting blade (8) so no
contact is made.
NOTE:
If the blade guard (9) becomes clogged, tilt the upper handle (3) so the
cutting blade (8) is above ground level. This assists in clearing the debris from the
cutting blade (8) and blade guard (9). If the debris does not fall out, stop the motor,
wait for the cutting blade (8) to stop rotating and remove debris from the blade guard
(9).
m
WARNING!
The motor housing may become very hot during use. Avoid contact
during and after operation
AUS
LE2500P
Operation
AFTER SALES SUPPORT
19
1300 855 831
MODEL: LE2500P PRODUCT CODE: 61758 09/2018
