16
2.9.2. Electrical cable connections - power or control
Loosen the four recessed head screws M6 Torx t30 on the connection box access hatch. Thread the power cables through the cable glands to make
the equipment leaktight.
The power cable conductors that are rigid or fitted with end pieces are screwed in the fixed body of each switch.
2.9.3. General power connection (single-phase) of the unit
Thread the power cable through the left-hand cable gland and connect the general power cable to the corresponding switch, according to the wiring
diagram below:
Pas de neutre
sur la VEX410
Pas de neutre
sur la VEX410
No neutral on VEX410
No neutral on VEX410
