Multi-Unit Residential HRV/ERV
16
The following are typical items (sold separately) that may be used for standard installation.
Contact your local distributor to order Aldes items.
»
Ceiling mount bracket for H/E80 (P/N 609419)
»
Ceiling mount bracket for H/E130 (P/N 609418)
»
Digital Multifunction Controller (P/N 611242-FC) (required to enable free cooling)
»
Electronic humidistat with LCD (P/N 611227)
»
20/40/60 Minute Timer (P/N 611228)
»
Speed Control (P/N 611229)
»
Mode Control (P/N 611230)
»
Interior exhaust grilles
»
Supply diffusers
»
Sleeves or register boxes for interior supply and exhaust
»
Exterior wall hoods for supply and exhaust
»
Insulated duct
»
Uninsulated duct
»
MR Modulo (constant airflow regulators)
Mounting the units
Mounting the units using chains
To suspend the device using the supplied chains, affix the four mounting brackets to the
upper corners of the unit. Then, using the chains and the springs, suspend the air exchanger
from the joists.
Mounting the units using a ceiling bracket (sold separately)
It is highly recommended to refer to the detailed installation instructions that are provided
with the ceiling bracket kit.
Assemble the ceiling bracket, place the antivibration grommets and affix to the ceiling with
appropriate fasteners. Next, attach the provided mounting brackets to the corners of the
unit. Lift the end of the unit with the hooked brackets to the ceiling bracket and attach, then
raise the other side of the unit until it snaps into place. Finally, use the two security screws to
fix the unit to the ceiling bracket.