S.S.C. HD A Module - Installation and user’s guide - 030718 - 7
How to use the S.S.C.
How to change satellites when using the system
1. By using
w
, select the chosen satellite.
2. Once
w
released, the chosen satellite LED will flash a few seconds, then will stay on display.
The message «Search...» will appear : meaning that the satellite system is searching the chosen satellite.
Once the satellite found, the message «Pointing OK!» will appear.
1.Turn the S.S.C. Module on by pressing .
2. By using
w
, choose the satellite.
Keep pressing this button to switch from one satellite to another.
Each time you change satellites you will hear a beep tone.
The satellites are programmed in the following order:
OPTUS D3
•
OPTUS C1
•
OPTUS D2
•
INTELSAT 19 •
Satellite
Description
OPTUS D3
VAST, FOXTEL, FTA (Free To Air) SERVICES
OPTUS C1
VAST, FOXTEL, FTA (Free To Air) SERVICES
OPTUS D2
MULTICULTURAL FTA/PAYTV SERVICES
INTELSAT 19
MULTICULTURAL PAYTV/FTA SERVICES
3. Once
w
released, the chosen satellite LED will flash for a few seconds, then will stay on display.
The message «Search...» will appear : meaning that the satellite system is searching the chosen satellite.
Once the satellite found, the message «Pointing OK!» will appear.
4. Power on the receiver and TV, choose a programme on the corresponding satellite.
Warning :
Every time you use the S.S.C, the last chosen satellite will automatically be selected.
* The satelite may vary depending on the software version.
Closing principle
1. Press the
s
button on the S.S.C. module, the message «Close» will appear. The message will disappear
once the satellite system will be fully closed.
2. Switch the receiver, S.S.C module and television off.
Warning :
The warranty will be void if you do not close the dish
