S.S.C. HD A Module - Installation and user’s guide - 030718 - 10
Technical features
Frequencybord : KU
Frequency : 10,7 à 12,75 GHz
Polarization : Horizontal and Vertical
Power supply : 12 V DC
Power : 13 W maximum
Operating temperature : +15°C à +50°C
Humidity rate : 85 % maximum
Dimensions : l = 167 mm
h = 110 mm
p = 45 mm
Weight : 0,30 kg
Stand by consumption : 0,03 A
What to do if the system breaks down
Problem
Solution
The message «LNB Short-cut!» is displayed
There is a short circuit on the coax cable between the
LNB on the satellite system and the LNB IN on the S.S.C.
Check the corresponding cable.
The message «NB Error! » is displayed
The coax cables connected to the LNB IN and OUT TO
DEMO are inverted.
The message «LNB Disconnected» is displayed
There is no connection between the sat unit LNB and
the LNB IN on the S.S.C.
Check the corresponding cable.
The message «Antenna is stuck» is displayed
The S.S.C has detected a steering problem on the
automatic sat unit.
Check the motor cable between the S.S.C. and the
automatic sat unit.
The message «Low Battery!» is displayed
The voltage on the battery or on the power supply is too
low.
Charge the battery or change the power supply.
The message «-> Secu contact» is displayed
The S.S.C. has detected the presence of the security
contact. The automatic sat unit will not be able to open.
Stop the vehicle’s engine to use the S.S.C..
The satellite system does no longer find the satellite
Make sure there is no obstacle in front of the satellite unit
(building, tree...).
When the transmitter changes the frequencies, the
positionning will not be done properly. Contact a
technician or connect to our website
.
