Onelight with SSC unit - User’s guide - 070117 - 9
SSC connection layout
1
2
3
4
5
N° : description
Type of connection
Description of inputs / outputs
1 : IR
RJ-11
Infrared control. A remote sensor is delivered with
the remote control (in option).
2 : LNB in
Coaxiale type F
Connection with the LNB from the antenna.
3 : Out to demo
Coaxiale type F
Connection used between the unit and the receiver.
4 : Data
RJ-45
Used to transfer the updating data.
5 : Motor
Power
Used for the motorization of the satellite system.
6 : Contact
Cosse
Safety device : will fold the antenna and is
connected to the vehicle ignition.
7 : 10-15V DC
Jack
Main supply.
Reminder :
• The system must be in a vertical position in a well ventilated space.
• Do not use existing coaxial circuits. The quality of the picture can be affected.
• Each link will weaken the signal.
• Cables of a different type can also change the quality of the picture.
• In any case, even when initial cables have been put in:
- A direct line (no links) with a 5A fuse must go from the unit to the battery for the + wire.
- A direct line (no links) must go from the unit to the battery for the - wire.
- A direct line (no links) with a 5A fuse must go from the unit to the “+ after ignition” located
on the ignition key or on the main unit.
• Never use the “+ after ignition” on the fridge, the steps or the battery separator.
• You must always use the cables that are provided.
• The warranty will no longer be applicable if these instructions are not followed.
