Alcorn McBride Light Cue Pro User’s Guide • July 15, 2010 Page 19
Rear Panel Controls and
Connectors
The rear panel provides the four (4) DMX input and output
connectors, a SMPTE In connector, MIDI In connector, an RS-232
control port, a Parallel input/output port, a 4 Position select switch
for Reset, a USB port, two (2) Ethernet ports and the power
connector.
Reset Select Switch
This switch, when flipped to the “Up” position next to the word
reset, will restore the factory default settings for IP Address, front
panel buttons, and other non-volitile stored settings.
Power
The power input is a barrel connector with center pin (+) and the
outer rim (-). The Light Cue Pro requires 9.0 VDC at 1 Amp. DO
NOT EXCEED THE SPECIFIED INPUT VOLTAGE RANGE. An
external 115 or 230 VAC power supply is provided with the unit.
