Alcorn McBride Binloop User’s Manual
Page 65
Segment
This is the number of the video clip that you want to play (for Play
triggers).
Offset
This field specifies a starting offset into a video or audio file. For example,
entering 00:00:05.00 would skip the first 5 seconds of the file. If you use this
feature with a video, keep in mind that it can take a significant amount of time
for the reproducer to locate the correct point within the file. For that reason, you
should always use the ‘Search’ command, and you should always allow for
adequate search time before sending the ‘Play’ command in synchronous
applications.
Stereo or Mono versus Independent
This setting is used for audio-only playback from the left or right channel.
If you use the default setting of
Stereo or Mono
, audio and video clips
play normally on both channels (mono clips are duplicated on the left and
right audio outputs). However, if you wish to play a mono audio clip on
only one of the audio outputs, you may select the
Independent
option.
Summary of Contents for Digital Binloop
