42
March 26, 2021
CONFIGURING NETWORK AUDIO
Audio modules for the BinloopX utilize Dante or AES67 network audio to output audio signals. This section is a
basic overview of how to configure and route these audio signals using Audinate’s Dante Controller software.
This software is a f
ree download available from Audinate’s website (
CONNECTING THE AUDIO NETWORK
First, we have to make sure your audio network is connected properly. Audio network architecture can vary
wild
ly so to keep this example simple, let’s just assume that you have a completely separate audio network running
on a simple switch like so:
Your computer should be connected to the audio network using a wired network connection, either through a
dedicated wired Ethernet port or a wired Ethernet dongle.
The BinloopX is connected using the port (or ports if you are configuring a redundant network) labeled Network
Audio:
