Alcor Micro AU9412EEP, Technical Reference Manual

Page: 22 / 29

18 ELECTRICAL CHARACTERISTICS
DC ELECTRICAL CHARACTERISTICS
Over recommended operating conditions. Voltages are referenced to GND (Ground=0V).
LIMITS
SYMBOL PARAMETER TEST CONDITIONS -40
•
C to +86
•
C UNIT
MIN TYP MAX
VHYS Hysteresis on inputs Vcc=3.0V to 3.6V 5.2 4.3 50.4 V
VIH HIGH level input Vcc=3.0V to 3.6V 15 20 V
VIL LOW level input Vcc=3.0V to 3.6V 0.5 11 V
RoH Output impedance (HIGH
state) Note 2 28 34 43 ohm
RoL Output impedance (LOW
state) Note 2 28 35 43 ohm
VOH HIGH level output Vcc=3.0V Io=6mA
Vcc=3.0V Io=4mA
Vcc=3.0V Io=100µA 2.2
2.4
2.8 2.7 V
VOL LOW level output Vcc=3.0V Io=6mA
Vcc=3.0V Io=4mA
Vcc=3.0V Io=100µA 0.3 0.7
0.4
0.2 V
IQ Quiecient supply current Vcc=3.6V VI=Vcc or GND
Io=0 330 600 µA
Isup Supply current in suspend Vcc=3.6V VI=Vcc or GND
Io=0 70 µA
IFS Active supply current (Full
Speed) Vcc=3.3V 9 14 mA
ILS Active supply current (Low
Speed) Vcc=3.3V 2 mA
ILeak Imput leakage current Vcc=3.6V VI=5.5V or
GND, not for I/O Pins +/-
0.1 +/-
0.5 µA
IOFF 3-state output OFF-state
current VI=VIN or VII, Vo=Vcc or
GND +/-1- µA
NOTES:
1.
All typical values are at Vcc=3.3V and Tamb=25
•
C.
2. This value includes an external resistor of 24 ohm +/-1%. See "Load D+ and D-" diagram for testing
details.
3. All signals except D+ and D-.