Ballast is used at the base to stabilize towers against overturning. In circumstances where there is
t i t d
d l
f
t bili
C
t
t
li
f
d i
It h ll b
l
11, SPECIAL SAFETY RULES - 4
restricted ground clearance for stabilizers. Contact your supplier for advice. It shall be securely
positioned and made of rigid materials such as steel or concrete, but excluding liquids or granular
materials (i.e.not water or loose sand). It shall not be positioned to overload individual legs. Ballast
should be secured against accidental remove where practicable, and be supported on the lowest rung of
the bottom frame.
Remove all erection aids (e.g.system planking,
Alcomexindo Aluminium Scaffolding
plank, etc) from
the
Alexindo Aluminium Scaffolding
not belonging to the model type.
CAUTION after erection the
Alcomexindo Aluminium Scaffolding
can be moved to the proposed site
CAUTION after erection, the
Alcomexindo Aluminium Scaffolding
can be moved to the proposed site
of use (ground gradient must not exceed 3%). Carry out the following work steps to move the scaffold
tower system.
To move the scaffold tower system, disengage the brake level and move the
Alcomexindo Aluminium
Scaffolding
the desired location, observing the “Safety Rules” in section 2
After reaching the site : brake the castors by depressing the brake level, Adjust the castors, if
required, until the mobile scaffold tower system is standing level and the castors have ground contact,
This mobile scaffold tower system shall be erected by at least 2 competent persons.
1. Insert the four adjustable legs into the vertical tubes of two base frame ( one of base frame has a U-
shape extension rung). Make the legs and vertical tube have a firm connection by fastening the V-shape
bolt. Turn the assembled base unit upside down so that the wheels can contact ground. Lock the brakes
f
(
ifi d i
)
on four castors. (see magnified view)
PLEASE READ THIS INSTRUCTION CAREFULLY BEFORE USE
Copy Right 2012 - By Alcomexindo 021-8831036
(11)
