5
Sensor Module Replacement
Please take the following steps to install a new
sensor module.
(VERY IMPORTANT: The
device MUST BE TURNED OFF in order to
avoid IMMEDIATE DAMAGE to the sensor.)
Open the easy-replace
sensor panel.
You will see the
sensor module.
Remove the module by
pulling it straight
back.
Insert a new sensor
module in the
original position.
Make sure the new
sensor module is
firmly secured.
Close the easy-replace
sensor panel.
Ready for testing!
2.
Understanding Your Results (BAC Reading)
* Drinking alcohol in ANY amount may impair the ability to drive. There is no "safe" level of
alcohol intake before driving. Don't drink and drive.
Note: The maximum reading the device can show is 0.40%. A true BAC of 0.40% or above may result in
the onset of coma or even death by respiratory arrest. A reading of 0.40% may indicate an acutely
dangerous condition, but may also indicate a sampling error (such as liquid alcohol blown into the
device). Please carefully read the
Warning section
of this manual before operating the device.
- General Information about DUI/DWI -
The legal limit for intoxication (DUI/DWI) is
0.08%
BAC across most of the USA. According to the
American Medical Association (AMA), a BAC of
0.05%
is enough to impair the ability to drive. You
should never operate a motor vehicle when you are impaired by the consumption of alcohol, drugs or
lack of proper rest.
Your Reading
Your Range
Description
0.00% to 0.01%
Safe* range
Little/no alcohol intake.
0.02% to 0.04%
Moderate* range
Increased alcohol intake.
0.05% and over
Warning* range
Ability to drive may be impaired.
