4
pre-installed sensor module, batteries (x2), mouthpieces (x5) and compact carrying bag. The FULL PACK
additionally includes a field test kit (large zippered bag) and power car adapter.
Note: The only legally valid measure of %BAC (percent Blood Alcohol Concentration) is obtained by blood testing or other evidential
method of measurement. This device is for screening purposes only and should be used as a monitoring guide. This device must be
used strictly in accordance with the instructions provided with the product.
- Device Setup and Operation -
If you are using the Premium for the first time, please install two 1.5V AA batteries (included) and attach
a mouthpiece (included) to the unit.
1.
Instructions
Press and hold the
Power Button to turn
the unit on.
The cumulative test
count will be
displayed as you hold
the Power Button
down.
The display may
alternately show
“nor”, which is short
for normal operation.
The back-lit digital
display shows
results clearly
during day or night
conditions.
Release the Power
Switch. There will be a
countdown as the unit
warms up. The display
will show “blow”
when ready.
Secure your lips
around the
mouthpiece and blow
sharply and steadily
into the unit for about
4 seconds.
If you see “Flow” in
the display, the breath
sample was not strong
or long enough for
measurement. Please
try again.
If the device cannot
take a successful
sample, you will see
“Out” in the display
and the unit will
shut itself off.
Battery Replacement
The results will be
shown for about 15
seconds. The unit will
then shut itself off.
Remove the battery cover at the rear of the
unit and replace the old batteries with two
new 1.5V “AA” batteries. Make sure to
properly align the batteries by checking the +/-
orientation.
Note: There is a
Mouthpiece Storage
Slot between the
batteries. The Slot
holds 2 mouthpieces.
