30
x
You need to subscribe
to the Caller Display feature from
your network service provider.
“The Caller Display
feature isn’t
working”
x
The caller may be calling from a network that does not
“When I try to
make a call, I hear
Busy tone.”
x
If you’re using a
CC2300
multi-handset system, check
whether other handsets
are already on a call.
x
Make sure you’re holding the earpiece correctly over your
ear.
“The volume in the
earpiece is low
when I’m on a call”
x
Adjust the volume using the UP/DOWN button.
Intercom and transfer
x
Make sure the other handset is in range of the base unit.
“I can’t transfer a
call”
x
Make sure you are dialling the correct number for the other
handset.
If the fault persists…
x
Disconnect all other instruments
connected to the same
line as the
CC2300
and try to make a call
x
Disconnect the base unit
from the telephone line and plug
a different
phone
into the master telephone socket. Try
making a call. If this works, the line is OK.
x
If the call does not work, and you are using a
two-way
socket adapter
, remove it and plug a telephone directly into
the socket. If the call now works, the adapter may be faulty.
x
If you cannot make a call, the fault may be on the
exchange
line
. Contact the service provider.
x
If you still cannot identify the cause of the problem, contact
the
on
ALCOM
(65) 6841 2668.
transmit the caller’s number (e.g. it may be an international
call.)
