Desk/Wall mounting
continued...
Insert the rigid clips of the stand into the slots
on the bottom of the phone (nearer the centre
of the base). Press down firmly until the flexible
clips clicks into place.
To remove the stand,
(
1
) pinch the flexible
clips, (
2
) pull back the stand, and then (
3
)
slide up and forward as shown below.
Mark two points on the wall that are 77 mm
apart to lay the fixing centers as shown below.
BE CAREFUL
to check that there are no
electrical wires hidden in the wall. Fix two screws
at the marked locations, leaving approximately
7mm between the wall and the the screw head.
Hang the telephone on the screws using the
wall mount slots.
You may need to remove the
telephone from the wall and tighten the screws
so that the
telephone
is securely fixed and does
not w
obble
. Place the Handset on the cradle
with the
parking hook
on the cradle arranged
to fit in the
parking recess
under the earpiece
on the Handset.
77 mm
8
