manualshive.com logo in svg

ALcom Colombo Combo, Instruction Manual

Share
Download
ALcom Colombo Combo Instruction Manual Download Page 61

60

Caller Line Identification (CLI) service does not work

 

. Check your subscription with your network operator

A phonebook entry cannot be stored

 

. The phonebook is full. Delete unused entries.

No display  

 

 

. Try recharging or replacing the batteries in the cordless handset

 

. Try disconnecting and connecting the telephone base power supply.  

Unable to register another handset

 

. Maximum number of 5 handsets has been reached.

 

. The display shows 

« Searching »

. You must de-register a handset in order 

to register a new one.

Noise interference on your radio or television

 

. Your telephone base or charger may be too close. Move it as far away as 

possible.

You hear busy tone when you press when you try to make a call.

 

. Another handset registered to the same base, may be on a call. 

 

. Make sure that your cordless handset is within range of the base. 

Answering machine does not record messages

 

. Switch the answering machine on.

 

. The memory may be full. If so, you will need to delete some messages.

 

. Answer  mode  may  be  set  to 

«  Answer  Only  »

.  Change  the  mode  to  

« Answer & Record »

.

Cannot access messages remotely

 

. Remote access may be switched off.

 

. Check that you are using the correct PIN code. 

Cannot record outgoing message

 

. The memory may be full. If so, you will need to delete some messages.

Answering machine stops automatically

 

. The memory may be full. If so, you will need to delete some messages.

 

. The maximum individual message length is 3 minutes.

Summary of Contents for Colombo Combo


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands