28
5.3 String
5.3.1 Prefix and Suffix:
Start Configuration
Set up prefix
(
00H
)
Set up suffix
(
00H
)
End Configuration
Note:
The maximum characters can be set as prefix and suffix are 10
ASCII characters, if the setting is 0 means there is no prefix or
suffix.
Formats of prefix and suffix are as follows:
Prefix string
Barcode data
Suffix string
The steps to setup prefix and suffix:
Scan “Enter to Setup” and “Prefix” barcode.
Find the ASCII code in appendix B.
Scan the desired barcode to set as prefix/suffix.
Scan “End” barcode. Scan “End Configuration Setup”.
Summary of Contents for Clarigo C11
