Signal strength icon
Line icon
Key Lock icon
New call icon
Mute icon
Battery status icon
This icon is always displayed when your phone is on, and
shows the current signal strength. More bars indicate more
signal strength.
This icon indicates that the line is engaged.
This icon indicates the keys are locked.
This icon indicates that there i s a newcall. To view the caller,
access the Call Log menu. See page 13.
This icon indicates that your phone's microphone is off
temporarily.
This icon is displayed at all times when your phone is on,
and shows the l evel of your battery charge. The more bars,
the greater the c harge.
LCD Window Icon Descriptions
This area displays in-use
information such as the other
party's number, call duration,
menus, etc. In Standby mode, it
displays the handset number, and
the current time.
B
U
EFORE SING
3
：
26
You can remove the registered handset
from the base if necessary.
The LCD w indow displays all
handsets currently registered to
the base.
1. P ress the
button.
repeatedly
tochoose
, then p ress the
OK button.
3.Enter the PIN,thenpressthe OK
button.
4. P ress the
buttonrepeatedly
tochoose
, then press the
OK button.
2. P ress the
or
button
or
Result
:
Releasing Handset
5. If you want to select the handset to
release individually, enter the
number(s) of the handset(s).
When the selected handset
number(s) disappears in the LCD
window, press the OK button.
Result :
The selected handset(s) will be
removed from the base. The
LCD window displays
.
If the removed handset is
currently registered to another
base unit and is within the r ange
of the baseunit,youcanusethe
handset with the base.
There are two different Caller ID types
which are DTMF and FSK. This feature
allowsyoutochangetheCallerIDtype.
1. Press the
button.
3. Enter the PIN, then press the OK
button. Then the LCD window
displays
.
2. Press the
or
buttonrepeatedly
to choose
, then press the
OK button.
Caller ID Type
4. Press a nd hold the # button for
about 3 seconds, thenthe current
setting is displayed(FSK or DTMF).
5. If you w ant to change the Caller ID
type, press the * button once. Then
the phone exit to standby mode.
6. If not, press the
button to exit.
Menu
