B
U
EFORE SING
6
M
ENU
23
The handset which comes with the base
unit was already registered as handset 1.
Each additional handset youpurchase
must be registered to the base unit.
A handset can be registered to up
to 4 different base units. And a
base c an be used with up to 6
handsets.
To register a handset:
: The PIN is preset to "0000" at the
factory. You can change the PIN.
For details, see page 22.
Note:
1. Press the
button.
OK button.
3. Enter the PIN, then press the OK
button.
Note
repeatedly
to choose the base number you want,
then press the OK button.
2. Press the
or
buttonrepeatedly
to choose
, then press the
4. Press the
or
button
Registering a New Handset
5. Press and hold the
button on
the base for more than 5 seconds,
then the
lamp starts toblinks.
Then release the button.
6. Press the O K button.
7. Enter your phone's AC
(Authentication Code), and press
the OK button. The AC is "0000" .
Page
Result :
Result :
The L CD window prompts you
to enter AC.
When the registration is
properly completed, the LCD
window displays the handset
number, and returns to Standby
mode.
Squeeze
this button.
Using Handset Carrying Clip
The supplied handset carrying clip
allows you to conveniently carry the
handset with you. It clips easily to your
belt, waistband,orshirtpocket.
If you want t o remove t he carrying clip:
Insert a screw driver along the edge
of one of its arms and releasetheclip.
Then lift itoff.
If youwanttoattach the carrying clip:
Attach the carrying clip to the back
of the handset. Make sure that the
carrying cliplocks into place.
Using Earmic (optional)
The earmic jack is located in the
middle right side of the handset
and is
standard plug.
Simply plug the
into the
jack and t h e
will be
activated.
2.5mm
earmic
earmic
Note:
Earphone
Microphone
Clip
Earmic plug
Earmic jack
When the earmic is plugged
into the earmic jack, the
microphone on the handset will
be deactivated.
