7
¾
Setting PABX code
1. In on-hook state, press and hold
DEL
key for 3 seconds to set PABX code, LCD displays
SET PCODE -
and the “-” flashes.
2. Press
UP/+
or
DOWN/-
key to set PABX code from 0 to 9 or -.
3. If choose “-”, it means no PABX code has been set.
4. Press
SET
key to confirm and exit.
¾
Setting Alarm Clock
1. In on-hook state, press
ALARM/P
key once, LCD displays
12-00 AL1
,
2. Press
UP/+
or
DOWN/-
key to select ON or OFF. LCD displays “
ALM
” icon when the alarm is
set to ON.
3. Press
SET
key, value “
12
” starts to flash.
4. Press
UP/+
or
DOWN/-
key to set the alarm hour and press
SET
key to confirm and enter
alarm minute setting.
5. Press
UP/+
or
DOWN/-
key to edit alarm minute and press
SET
key to confirm and go to next
group alarm clock setting.
6. Repeat the above steps to set additional alarms.
NOTE:
The first 3 groups alarm clock setting will be repeated periodically every day while the last
2 groups alarm clock setting are effected once.
SETTING PAGE NUMBER FOR CALL TRANSFER
¾
Setting paging number for phones connected in parallel.
1. In
ON-HOOK
state, press and
hold SET
key, LCD displays
EL--
2. Key in “ * ” and paging number
(example * 1 or * 2)
, use
DEL
key to edit.
3. Press
SET
key to confirm and exit.
4. To Remove Page number please repeat step 1 and press
DEL
.
CALL TRANSFER BETWEEN PARALLEL PHONES
¾
Transferring an Incoming Call to paralleled phones with Intercom
When a call comes pick up handset or press
H.F
. button from the first unit, then Press “ * ” and
paging number(
1
or
2)
that was set in the second unit, and that unit will ring. Pick up handset or
press
H.F
key on the second unit to have intercom conversation. Outside caller, first unit user and
second unit user will be connected with each other in conversation. First unit user may disconnect
the call so the second unit user and outside caller can continue the conversation or vice versa.
Important Notes
Θ
Only incoming calls can be transferred using this function.
Θ
Please use same model phones to use the above Call Transfer features. If different
model phone is connected in parallel, page number cannot be set and only can
Summary of Contents for AT6128
Page 1: ...6128 ...
Page 4: ...3 LOCATION DESCRIPTION ...