Alcoa BTT20SF, Assembly Manual

Page: 6 / 38

6
The wires, RED and GREEN go
through the handle and manifold for
the micro switch.
Place the handle up onto the
manifold and put the #10-32x3/8”
BHCS into the handle which will
attach the manifold to the handle.
Slide the other half of the alum.
Base plate onto the hydraulic hose
and push into place for the other
two #10-24X3/3” BHCS.
Then the BLACK and WHITE wires
go out through the trigger housing
until the trigger is connected. At this
point you can push the trigger into the
trigger housing hole in the handle.
Handle Assembly (cont’d)