background image

6

 

z

WPA: A strong security standard, supported by most Wi-Fi devices.8 to 63 ASCII 
characters needed.

 

z

WPA2: A stronger, newer security standard. Limited to newer Wi-Fi devices. 8 to 63 
ASCII characters needed.

 

¾

Login Settings

: define your login password

 

z

Login password characters: 4-16, if exceeds 16 characters, not allow to proceed;

 

z

If an invalid character is input, error message is displayed under user name, data not 
saved:

 

z

Password can contain letters, numbers, and symbols (ASCII characters 4-16), but not the 
following: ” ; \ & % + ‘ < > ?

 

¾

Profile management:

 Edit your profile

 

¾

PIN Code Settings:

 PIN operation: include three behaviors Enable/Disable/Modify

Note:

1. When you entered wrong PIN 3 times, PUK is needed, you can get this key from the operator. 
2. PIN code:4-8 digits.

 

¾

Connection mode: 

Automatic or Manual at draw down list;

 

¾

Network mode: 

Auto, 2G only, 3G only, 4G only modes in draw down list;

 

¾

Advanced Settings

 

z

DHCP

 

‰

Home Address: The router’s IP address on the LAN. The default setting is “192.168.1.1”.

 

‰

Subnet Mask: The router’s internal LAN subnet mask. The default setting is 
“255.255.255.0”.

 

‰

DHCP Server: DHCP Server will automatically assign IP addresses to devices on the 
network. The default setting is “Enable”.

 

‰

DHCP IP Pool: Set a range of IP addresses available to access.

 

‰

DHCP Lease Time: Amount of time that a Wi-Fi enabled device can use its assigned IP 
address before it is required to renew the lease.

 

z

MAC Filter: 

MAC filtering is used to control specific MAC addresses to access, include 

Disable, Allow, and Deny.

Note: 

The maximum allowed MAC list is 10

 

¾

About: 

Display your device basic information

 

z

Reboot

: Restart the device

 

z

Reset

: Reset the device to the original factory settings

6. More

 

¾

WPS

 

z

WPS mode: PBC (default) Or WPS PIN, If choose PBC mode, PBC button and guide 
reminder display;

 

z

If choose WPS PIN, WPS PIN put in and guide reminder display. put in WPS pin then click 
Save to finish setting

 

¾

Online update

Device Auto check SW version, if detect a new SW version, online update reminder icon 

 display on home page and also under more function sync display.

Summary of Contents for Y900














Reviews: