Alcatel SpeedTouch 610, Orientation Manual

Page: 40 / 56

3EC 37770 AAAA TCZZA Ed. 02
2 The SpeedTouch™610 Web Interface
36
2.5. LAN Services Tasks Links
DHCP
Clicking this button pops up the Dynamic Host Configuration Protocol (DHCP) page.
This page allows to:
•
Enable/disable the SpeedTouch™610 (Auto)DHCP server:
The SpeedTouch™610 features a DHCP server which allows the PCs/computers
on your local network to automatically obtain an IP address (select DHCP
Server). In case no DHCP is used on your local network, the SpeedTouch™610
DHCP server can be disabled (select No DHCP). The SpeedTouch™610 is
furthermore able to probe your local network for another DHCP server (select
AutoDHCP) . If so, it slips into DHCP client mode, if not the SpeedTouch™610
becomes DHCP server. Click Apply to apply your selection.
•
Configure the SpeedTouch™610 DHCP server lease pool properties:
The SpeedTouch™610 DHCP server (if enabled) will use the address pools listed
in this table to provide IP addresses to requesting DHCP clients. To configure a
user-defined IP address pool (appropriate to your local network conditions) click
New and provide all needed information. Click Apply to add your entry to the
table.