![Alcatel Plus10 Manual Download Page 30](http://html1.mh-extra.com/html/alcatel/plus10/plus10_manual_2891539030.webp)
57
58
Usage setting
Click top right option menu, selected “Usage setting” to set Usage
data.
3.6.4 Message
Click “SMS” area to enter Message interface, the following items are
included:
+New message: create new SMS;
Draft: save the SMS not sent;
: delete SMS
: send SMS fail
: Option Menu (SMS setting; Delete all messages)
Read/Reply/Forward SMS
Double click a message to read the entire message; same time a SMS
box is displayed for Reply/Forward
3.6.5 Settings
Click “Settings” areas to enter Setting, the following items are included:
Wi-Fi Settings
802.11 Mode
Select the mode used, such as 802.11b, 802.11b/g,
or 802.11b/g/n.
SSID
This is the name of Wi-Fi network, which was used
to identify your Wi-Fi network. The length of the
SSID should be 1-32 characters including “_”.
SSID Broadcast The default setting is “Enable”.
Wi-Fi Channel
Different domain has different channels: Channel
1~11 in FCC (US)/IC (Canada); Channel 1~13 in
ETSI (Europe); Channel 1~13 in MKK (Japan)
Max Number of
Users
Set the maximum number of Wi-Fi users. The
default and maximum value is “15”.
Security
Set the cipher for Wi-Fi; Select an encryption mode
in the list and set your password. If you select
“Disable”, any Wi-Fi enabled device can connect to
the device without the password.
WEP
Lower security. Works with older Wi-Fi devices.
Recommended only if your devices don’t support
WPA or WPA2.
WPA
A strong security standard, supported by most Wi-Fi
devices. 8 to 63 ASCII characters needed.
WPA2
A stronger, newer security standard. Limited to
newer Wi-Fi devices. 8 to 63 ASCII characters
needed.
Login Settings
Login password
characters
4-16 characters. If it exceeds 16 characters, you
are not allowed to proceed. If an invalid character is
input, an error message is displayed:
Invalid password! The length of login password is
4-16, a-z, A-Z, "- + ! @ $ # ^ & *".
Profile management
Edit your profile.
PIN Code Settings
Disconnect the 3G/4G network if you want to perform PIN Code
settings.
PIN operation: include three behaviors Enable/Disable/Modify.