Alcatel OneTouch Conquest, User Manual

Page: 150 / 349

Settings 143
Your Wi-Fi settings changes are saved.
l
The password, for a household wireless LAN router, is sometimes found on a sticker on the
router (WEP, WPA, KEY, etc.). Contact the router manufacturer for information. For
password for a public wireless LAN, check with user's service provider.
l
Entering a password is not required if an access point is not security protected.
Advanced Wi-Fi Settings
The advanced Wi-Fi settings menu lets you set up and manage wireless access points.
n
Enable Notification when Open Networks Are Available : From Wi-Fi settings, tap Menu
> Advanced > Network notification .
l
The setting is available when Wi-Fi is turned on.
l
Tap Network notification to turn the option on or off.
n
Scanning always available : From Wi-Fi settings, tap Menu > Advanced > Scanning
always available
l
The setting is available when Wi-Fi is turned on.
l
Tap Scanning always available to turn the option on or off.
n
Set Timing for Pausing a Connection : From Wi-Fi settings, tap Menu > Advanced >
Keep Wi-Fi on during sleep mode and then select a setting.
n
Install certificates : From Wi-Fi settings, tap Menu > Advanced > Install certificates and
then select a setting.
n
Wi-Fi Direct : From Wi-Fi settings, tap Menu > Advanced > Wi-Fi Direct to select a setting.
n
WPS Push Button : From Wi-Fi settings, tap Menu > Advanced > WPS Push Button to
select a setting.
n
WPS Pin Entry : From Wi-Fi settings, tap Menu > Advanced > WPS Pin Entry to select a
setting.
n
Check MAC Address : From Wi-Fi settings, tap Menu > Advanced .
l
MAC Address appears below “MAC Address.”
n
Check IP Address : From Wi-Fi settings, tap Menu > Advanced .
l
IP Address appears below “IP Address.”