5
Connection Statistics Icon Description
Network Signal
Indicates the signal strength of the network
Network Status
Indicates the network status. This will display the
operator name which the modem can find the
network. Or show the modem haven’t ready.< No
(U)SIM> or <NO Device>
Network Type
Display in the status bar, to show you which network
you are using (GPRS / EDGE/ UMTS or HSPA)
Roaming
Roaming Icon “
”, when the network is under
roaming
New Message
Display the SMS status including new SMS/SIM card
memory is full/Data Card memory is full
Network Connecting
Connecting Icon “
“display in the status bar, when
the network is connected into internet network
Following table are listed the LED Indicates for each status.
LED Indicator
Desctiption
Flashing Green & Red multicolour
circularly
Network Searching
Quickly Flashing Green & Red multicolour
circularly
Out of order
Green Light Slow Flashing
Registering into HSPA or UMTS network
Constant Green Light
Registered to HSPA or UMTS network
Red Light Slow Flashing
Registering into GPRS or EDGE network
Constant Red Light
Registered to GPRS or EDGE network
Entrance to Main Interface
The application runs automatically and the main window will pop up
when the modem will be connected. You can also access and run the
application from the <Start> menu.
If the PIN code is enabled, please enter the correct PIN code in the
entry field, and click on <OK>. You may try only 3 times to enter the
correct PIN code; after three incorrect attempts, the USIM or SIM card
will be blocked.
