Alcatel 1S 5024A, User Manual

Page: 34 / 58

65 66
6
Getting connected .................
To connect to the internet with this phone, you can use
GPRS/EDGE/3G/4G networks or Wi-Fi, whichever is
most convenient.
6.1 Connecting to the internet
6.1.1 GPRS/EDGE/3G/4G
The first time you turn on your phone with your
SIM card inserted, it will automatically configure your
network service: 4G/3G/2G auto.
If the network is not connected, you can turn on cellular
data in Settings > Network & Internet > Data usage.
To check the network connection you are using, touch
Settings > Network & Internet > Mobile network >
Access Point Names or Network .
To create a new access point
A new GPRS/EDGE/3G/4G network connection can be
added to your phone with the following steps:
• Touch Settings > Network & Internet > Mobile
network > Access Point Names .
• Touch and enter the required APN information.
• When finished, touch and then Save .
To enable data roaming
• Touch Settings > Network & Internet > Mobile
network > Roaming .
• When data roaming is disabled, you can still perform
data exchange with a Wi-Fi connection (refer to
"6.1.2 Wi-Fi" ).
To set preferred network mode
• Touch Settings > Network & Internet > Mobile
network > Preferred network type .
6.1.2 Wi-Fi
You can connect to the internet when your phone is
within range of a wireless network. Wi-Fi can be used
on your phone even without a SIM card inserted.
To turn Wi-Fi on and connect to a wireless network
• Touch Settings > Network & Internet > Wi-Fi .
• Turn on .
• Once Wi-Fi is turned on, detected Wi-Fi networks
are listed.