Alcatel-Lucent OmniPCX Office, Manual

Page: 36 / 62

Type Message Location Additional Information Action
124 FAN STATUS CPU (80) or
Controller
Board (81)
or (82) INFO 0 = fan identity (0 = fan 1; 1 =
fan 2)
INFO 1 = fan status (True = OK;
False = KO)
125 POWER SAVING
System in power-saving mode;
only the 2 first Reflexes tele-
phones as well as all T0 ac-
cesses will be taken into ac-
count INFO 0 = module (0 = basic mod-
ule; 1 = extension 1; 2 = extension
2)
INFO 1 = reason (0 = Fan problem) Check rota-
tion of the
module fans.
126 DSP RESOURCE KO
Message not processed by the
DSP of one of the controller
boards Controller
board (81
or 82) INFO 0 = DSP type 0 or 1 (DSP0 or
DSP1)
127 DSP RESULT CODES
These codes are used in con-
firmation messages and by the
reception buffer Controller
board (81
or 82) INFO 0 = DSP type 0 or 1 (DSP0 or
DSP1)
INFO 1 = Result code
INFO 2 = Result sub-code
INFO 3 = Type of resource
128 DSP KO
The DSP of one of the controller
boards is out of service. CPU (80) or
controller
board (81
or 82) INFO 0 = 0 or 1 (DSP0 or DSP1)
129 CPU KO
PowerCPU EE board not detec-
ted by the backpanel board 10
minutes after initialization INFO 0 = type of CPU (0 = Internet
access; 1 = VoIP)
INFO 1 = number of CPU resets
during the-10 minute period
INFO 2 = CPU state
INFO 3 = last byte of MAC
(Ethernet) Internet address of CPU
140 UNREGISTRATION
SIP un-registration CPU (80) INFO 0 = octet 1 of the IP address
of the remote registry
INFO 1 = octet 2 of the IP address
of the remote registry
INFO 2 = octet 3 of the IP address
of the remote registry
INFO 3 = octet 4 of the IP address
of the remote registry
141 REGISTER OK
SIP registration success CPU (80) INFO 0 = octet 1 of the IP address
of the remote registry
INFO 1 = octet 2 of the IP address
of the remote registry
INFO 2 = octet 3 of the IP address
of the remote registry
INFO 3 = octet 4 of the IP address
of the remote registry
Chapter
6
% *
36/62
! "#$ ! % $& !