Alcatel-Lucent OmniPCX Office, Manual

Page: 19 / 62

4.1.3 Adding Sets
When adding sets, attention must be paid to the limits on the number of sets and the features
offered by the system software key.
The set is recognized as soon as it has been plugged into the socket.
4.1.4 IP Phones
When an IP phone is connected to the network, default parameters are configured on the
phone set on connection.
To keep individual user parameters, configuration is required on the phone.
OMC configuration is recommended for large networks to activate the Automatic Set
Relocation Replace service.
4.1.4.1 Automatic Set Relocation Retrieve
The Automatic Set Relocation Retrieve service exchanges the data of the source and target
phones.
Example:
Retrieve
If Phone 50 has been configured and now a new IP Phone is connected to the LAN.
This Phone is automatically taken into account by the system with a default configuration and
is operational.
The phone number 150 is automatically allocated to this phone. The Automatic Set Relocation
‘Retrieve’ service is invoked from the newly connected IP Phone 150 (target) to retrieve the
configuration of phone 50 (source):
<ASR-Retrieve-code><Source-EDN>< source phone password>
Phone 150 is reset and has the same configuration as set 50.
This means that for each IP Phone in the network there is another Phone defined in the
system with the IP Phone’s previous default configuration.
For each IP Phone connected there are two Phones defined in the system. A license is
required to create an IP Phone whether it is connected or not. In this situation, for a system
with N users, 2xN subscribers are defined in the system and 2xN IP Phone licenses are
required. If N > 100, the number of subscribers and licenses would exceed the limits of the
system (200).
4.1.4.2 Automatic Set Relocation Replace
The Automatic Set Relocation Replace feature allows the retrieval of user parameters in
networks containing more than 100 sets.
- )* . - )*
! "#$ ! % $& !
19/62