Alcatel-Lucent 8950 AAA, User Manual

Page: 162 / 476

............................................................................................................................................................................................................................................................
Creating Attribute Sets Using the 8950 AAA Policy Assistant in Server
Management Tool
9-22
365-360-001R6.0
Issue 1, December 2008
............................................................................................................................................................................................................................................................
Figure 9-13 Items to Verify Tab of the Attribute Sets Panel
4. Click the Items Sent Back to NAS tab to add reply attributes for this policy.
You need to add reply attributes if you want the NAS to configure the session uniquely
for this policy. The server returns these attributes to the NAS if the authentication and
authorization steps are successful. This is referred to as provisioning the session.
5. Click Insert a record to open the Attribute Properties panel.
a. Select an attribute from the Attributes list and enter or select an appropriate
Value. For example, you can limit the session time to one hour, select the
Session-Timeout attribute and enter
3600
in the Value field; or identify a specific
IP address pool from which addresses are assigned., select the
Ascend-Assign-IP-Pool attribute and enter an appropriate value in the Value
field.
The Description below the Value field, provides guidelines on the format for those
attributes that support arbitrary data entered from the keyboard.
Click Show All Attributes to display all attributes included the dictionary selected
in the server profile.
Important!
To change the attributes that appear in this list, select Preferences from
the Edit menu. Select the Reply-items List option from the Server Management Tool
Preferences panel.
b. Click Insert to enter multiple attributes.
c. Click Close when you are done adding attributes. The reply attributes you
configured appear under the Items Sent Back to NAS tab.