Alcatel-Lucent 8950 AAA, User Manual

Page: 134 / 476

............................................................................................................................................................................................................................................................
Method Configuration Using the 8950 AAA Policy Flow Editor
8-6
365-360-001R6.0
Issue 1, December 2008
............................................................................................................................................................................................................................................................
Use the Timeout field to enter the timeout duration. Timeout specifies the maximum time
that a particular plug-in takes before following an error path. Method On EAP Nak
specifies the method to be invoked when the specified plug-in receives an EAP Nak from
the client. If the plug-in receives an EAP Nak and the Method On EAP Nak is unspecified
then, the plug-in follows an error path. Disabled Method, if set true, does not allow the
server to use the specified method.
Figure 8-6 Method Configuration pane - Advanced tabl
Use the Control tab allows you to control the methods during the progress of plug-in as
shown in the
Figure 8-6 . Use the Method On Success of Control tab to specify the
method to be invoked when the plug-in completes successfully. If left unspecified, the
request is considered to be accepted. Method On Fail is used to specify the method to be
invoked when the plug-in fails. If left unspecified, the request is considered to be rejected.
Method On Error is used to specify the method to be invoked when the plug-in
encounters an error.
Use the Success Msg, Failure Msg, and Error Msg tabs to specify the message, log level,
and channel if the specified method succeeds, fails or encounters an error respectively (see
Figure 8-7 ).