8262 DECT Handset
8AL90323ENAAed01
53 /
60
9 Live signal and notification management
9.1 Introduction
Your handset offers services such as live calls, emergency calls, event keys or status calls and man down,
shock, no movement or pull cord alarms. These services must be activated and configured by your
administrator. Please contact your administrator before using these services.
Only emergency and event calls can be initiated by the user. Live signals, status calls, smart Beacon, man
down, shock, no movement, and pull cord alarms are transparent to the user as these events are
automatically made by the handset.
Live signals:
Live signals are calls that are made automatically (every 90 seconds by default) by the handset to
the notification server. The information sent to the notification server allows the server to confirm
that the handset is under coverage and is working.
Emergency calls or notification calls:
Emergency calls are initiated by the user of the handset. They are used to notify the server of
emergencies such as injuries or material damage when specific keys are pressed.
Man down, shock, no movement, pull cord alarms:
Abnormal situations are automatically detected by the handset and an alarm is sent to the server.
Key event calls:
Key event calls are also initiated by users when pressing particular keys on the numeric keypad.
These are designed to notify the server that certain tasks have been completed, for example, 'room
is ready' in the case of a hotel application.
Status calls:
Status calls are automatically established by the handset each time the handset is plugged into or
removed from the charger and each time the handset is switched on and off.
Smart Beacon:
The handset is able to send a signal to the server when the user enters in a Beacon area.
