manualshive.com logo in svg

Alcatel-Lucent 8232 DECT Handset, User Manual

Share
Download
Alcatel-Lucent 8232 DECT Handset User Manual Download Page 55

8232 DECT Handset 

 

 

8AL90861USACed01 
 

55 /56

 

11

 

Declaration of compliance  

Marking:

 

This equipment uses the DECT harmonized frequency spectrum (1880Mhz-1900Mhz). 

This equipment is in compliance with the essential requirements of R&TTE Directive 1999/5/EC and with Directive 
2011/65/UE (ROHS). 
 
The Declaration of Conformity may be obtained from: 

32, avenue Kléber - 92700 Colombes – France

 

Contact: 

[email protected]

 

USA and Canada  

Handset: this device complies with Part 15-D of the FCC Rules and with RSS-213 of Industry Canada (). (FCC ID: 
T7HCT8121 IC: 4979B-CT8121). This device complies with Part 68 of the FCC Rules and with IC CS-03 Part V of 
Industry Canada. The ACTA registration number is: T7HW4NANCT8121. 
Chargers: this device complies with Part 15-B of the FCC Rules and with ICES-003 of Industry Canada. Operation is 
subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must 
accept any interference received, including interference that may cause undesired operation. 

Exposure to Radio Frequency Signals: 

This device has been designed and manufactured not to exceed the SAR (Specific Absorption Rate) radio frequency 
power transmission limits established by the different countries concerned. The SAR value measured is equal to 0.102 
W/kg (the globally accepted maximum limit being 1.6 W/kg). 

User Instructions: 

This equipment has very low levels of RF energy and is deemed to be compliant without testing of the specific 
absorption rate (SAR). This apparatus is Hearing Aid Compatible (HAC). 

Acoustic shock protection  

The acoustic level of the signal generated by the handset earpiece is less than 130 dBspl for a transient signal (123 
dBspl for Australia) and less than 118 dBspl (rms) for a continuous signal (120 dBA for Australia). 

 

 

Summary of Contents for 8232 DECT Handset



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands