background image

8232 DECT Handset 

 

 

8AL90861USACed01 
 

43 /56

 

8.2

 

Registering the telephone on other systems 

The telephone can be registered on several systems (maximum of 4).  
Note: the input is usually reserved for use with your main ALE International system. You can select the other inputs to 
register the telephone under another system (ALE International or other system). 

8.2.1

 

To make a new registration, when the telephone has already been registered on one or more 
systems, proceed as follows:  

1. Prepare your system for registration (see the system installation manual or consult your installation manager). 

2. When the system is ready: 

 

 

Access MENU. 

 

 

Install

 

 

 

Register

 

 

 

Enter the PIN Code. 

 

Apply. 

 

 

Select a system. 

 

 

Enter PARK code (enter nothing if not mandatory). 

 

Apply. 

 

 

Enter access code (enter nothing if not mandatory). 

 

Apply 

 

 

Select Power mode. 

 

 

Legacy Mode:  

 

Yes / No 

Call from encrypted system to un-encrypted system is accepted (yes) or rejected (no) 

 

Launch subscription. 

 

 

Return to idle. 

 

If the registration operation runs correctly (Subscription accepted), the telephone is ready for use, and the radio 
coverage icon appears. 

 

If the registration operation has not been successful, the station proposes launching the subscription again. 

 

Depending on the type of system concerned, registration may require one or more additional operations on the 
system. 

 

 

Summary of Contents for 8232 DECT Handset



























































Reviews: