Call Trace Collector is present, this network interface will also be used to sync Call
Trace and Debug Trace data collected from the network, with the peer 5620 SAM
Auxiliary Call Trace Collector. This IP address can be different from the addresses
used by the 9958 WTA clients and the managed devices to communicate with the
5620 SAM Server.
•
In a redundant 5620 SAM installation, the 5620 SAM Auxiliary Call Trace Collector
must have IP connectivity to the 5620 SAM Server peer. If different interfaces are
used for communication to the clients and/or auxiliary servers, the IP connectivity
required to the 5620 SAM Server peer could be through the client interface (NIC 3 on
) or the database/server interface (NIC 1 on
“Distributed 5620 SAM Server/Database deployment with multiple network
interfaces” (p. 8-4)
). Therefore, routing must also exist between the client interfaces
(NIC 3 on
Figure 8-2, “Distributed 5620 SAM Server/Database deployment with
multiple network interfaces” (p. 8-4)
) on both SAM Servers and the Auxiliary
Collectors.
•
Additional network interfaces may be configured on the 5620 SAM Auxiliary Call
Trace Collector workstation, at the customer’s discretion, to perform maintenance
operations such as workstation backups.
•
IPv4 and IPv6 network elements can be managed from the same interface or from
separate interfaces. (NIC3 and/or NIC4 on
Figure 8-2, “Distributed 5620 SAM
Server/Database deployment with multiple network interfaces” (p. 8-4)
).
5620 SAM Auxiliary Cflowd Collector multiple IP addresses
deployment scenarios
5620 SAM Auxiliary Cflowd Collector multiple IP addresses deployment scenarios
The 5620 SAM Auxiliary Cflowd Collector supports the configuration of different IP
addresses for the following purposes:
•
One network interface can be used to retrieve information from the managed network.
(NIC 2 on
Figure 8-2, “Distributed 5620 SAM Server/Database deployment with
multiple network interfaces” (p. 8-4)
) This network interface contains the IP address
that the managed devices will use to send the cflowd flow data from the network
elements.
•
One network interface can be used to send the formatted IPDR files to the target file
server (NIC 3 on
Figure 8-2, “Distributed 5620 SAM Server/Database deployment
with multiple network interfaces” (p. 8-4)
). This network interface contains the IP
address that all clients will use to communicate with the 5620 SAM Auxiliary Cflowd
Collector.
Deploying the 5620 SAM with multiple network
interfaces/IP addresses
5620 SAM Auxiliary Call Trace Collector multiple IP
addresses deployment scenarios
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
8-8
5620 SAM
3HE-09809-AAAG-TQZZA 13.0 R7
Issue 1
December 2015
