Alcatel-Lucent 4080 IP-DECT
Installation Manual
8AL90850USAAed01
10
1
4080 IP-DECT GENERAL
1.1
GENERAL
This installation Manual is valid for installing a DECT transceiver (4080 IP-DECT) to a
wall in horizontal or vertical position. The 4080 IP-DECT is designed for indoor use.
When installing an 4080 IP-DECT outdoors, please use the dedicated Outdoor Cabinet:
Note that there are two types of DECT Transceivers::
•
4080 IP-DECT Access Point Integrated antennas.
•
4080 IP-DECT Access Point External antennas.
Note: The 4080 IP-DECT Access Point External antennas must always be
installed/used in the outdoor cabinet! For more information consult the manual for
the Outdoor Cabinet for 4080 IP-DECT.
1.2
COUNTRY SELECTION
The 4080 IP-DECT is equipped for EMEA, Latin America and North America. However,
the DAP Controller determines the frequency used and the power level. The DAP
Controller is the software that runs on a PC to control the 4080 IP-DECT.
There are three types of DAP Controllers available for the 4080 IP-DECT:
•
DAP Controller – International.
This version is used in EMEA countries and countries that use the European
frequencies and power levels.
•
DAP Controller - North America
This version is used in North America.
•
DAP Controller - Selective Countries.
This version is used in countries with other frequency ranges than EMEA or North
America
Note: In North America, only the “DAP Controller - North America” will be delivered, so
no other frequencies than the North America frequencies and power levels are
possible in North America.
Note: In Europe, only the “DAP Controller - International” will be delivered, so no other
frequencies than the European frequencies and power levels are possible in
Europe.
