ALC Connect Plus AHS616, User Manual

Page: 26 / 37

— 24 —
Pairing the Motion Detector
w
Tap Motion Detector from the
Device list. Name the Motion Detector
and the location, tap
Save .
x
Tap
Pair
, then remove plastic tab
to start pairing the Motion Detector.
“Add Sensor Completed” will appear
and the Motion Detector will be
added.
v
At the dashboard, tap “
+
” (Add Device).
u
The Motion Detector comes with
three pre-installed AA batteries. If
they need replacing, press the tab at
the bottom of the sensor and insert
three AA size batteries following the
diagram in the compartment.
If the Motion Detector did not pair in step 4, open the compartment and and press the
pairing button inside the Motion Detector. Tap
Pair to start pairing the Motion Detector.
+
+
+
PAIRING