ALC Connect Plus AHS616, User Manual

Page: 25 / 37

— 23 — — 22 —
w
Tap
Door Sensor
from the Device
list. Name the sensor and the
location, tap
Save .
x
Tap Pair , then remove plastic tab to
start pairing the Door/Window Sensor.
“Add Sensor Completed” will appear
and the Door/Window Sensor will be
added.
Add Door Sensor
75% 9:41 AM Carrier
Pair
complete.
Cancel
Add Motion Detector
75% 9:41 AM Carrier
Pair
complete.
Cancel
Add Indoor Siren
75% 9:41 AM Carrier
Pair
2. Plug adaptor to power outlet.
complete.
Cancel
Add Outdoor Siren
75% 9:41 AM Carrier
Pair
2. Plug adaptor to power outlet.
complete.
Cancel
Add Remote Control
75% 9:41 AM Carrier
Pair
complete.
Cancel
v
At the dashboard, tap “
+
” (Add Device).
Pairing the Door/Window Sensor
u
The Door/Window Sensor comes with
a pre-installed CR2032 battery. If it
needs replacing, simply remove the
cover by sliding it downwards and
replace with a new CR2032 battery.
PAIRING:
All included sensors are paired with the Control Hub at the factory. See following pages
to pair them again or if additional accessories are purchased.
PAIRING