— 27 —
— 26 —
INSTALLATION
Installing the Camera
Installing the Door/Window Sensor
Note:
See page 13, step 1 for connecting to
AC Power.
v
Slide the camera into the Camera
Bracket if mounting on ceiling or wall.
Rotate the camera to the desired
viewing angle.
v
Select a location on a door or
window. The large section of the
sensor should be fixed on the
immovable frame of the door/window.
Align the small piece to the large one.
Fix the small piece on the movable
part of the door/window frame.
u
If not mounting, but just using on a flat
surface (desk, table, etc.), skip to step
2.
Secure the multi-position Camera
Bracket to a stable surface, ceiling or
wall using the two screws. If needed,
two anchors are also included.
Option A - Double-Sided Tape
u
Apply the double-sided tape to the
rear of both sections of the Door/
Window sensor.
Notes:
• When it is finished, open the door or window
to test if the sensor has been correctly
installed. You’ll receive an alert from the
mobile device if the App and sensor have
been correctly installed and paired.
• See page 15 for installing/replacing the
battery.
