2.1.5. Setting the extension limitation
7
To adjust the extension stop, move the brace to flexion against the flexion
stop you have already adjusted.
8
Raise the extension stop with your fingernail until the stop is disengaged
from the set position and can be moved round the centre of the hinge with
the spring plate.
9
Insert the extension stop in the recess at the position required.
Please
bear in mind that excessive bending of the spring plate can result in
damage.
7
8
9
To secure the stops, fit the cover back on again and fasten it down with the
screws you previously removed.
Reattach the condylar pads to the hinge.
At both hinges, all the steps in the procedure must be performed in an
identical manner.
www.albrechtgmbh.com
11
User Instructions