- 18 -
11.2.5.1
DHCP enabled
The next step is to enter the SSID of your network. How you can enter your network key is
described in chapter 7.1.
Now this menu is shown:
Please select the authentication method used by your WLAN router. In case you don´t use
any authentication method just select Open the radio will connect automatically afterwards.
After you have chosen you will see one of these three menus.
Please select now what kind of encryption key you are using.
Now you can enter the key. If everything was setup correctly you will now see these
messages on the display: – “
Please wait Connecting
”, “
Please wait Acquiring address
”
and “
Connected
”.
11.2.5.2
DHCP disabled
In case DHCP is not used in your network you have to enter the IP address, the subnet mask,
the gateway address, the primary and the secondary DNS manually. The radio will guide you
through setup screens. After entering the before mentioned information you have to enter the
SSID and authentication method like it was described in chapter 11.2.5.1.
11.3 Time Setup
Please go to chapter 8
Setting the time and date
Authentication
•Open
•Pre-Shared Key
•WPA
•WPA2
WEP
• Open
• PSK
WPA
• TKIP
• AES
WPA2
• TKIP
• AES
